How to vet a factory in China before you pay a deposit
The deposit is the moment your leverage drops. Here is how to check a Chinese supplier's licence, capability, certifications and bank details before any money moves.
On this page
For most first hardware products, the deposit is the single largest point of risk. Until you pay it, you can walk away. After you pay it, your leverage depends on the contract, the supplier's reputation and how much they want your next order. Vetting a factory is mostly about compressing uncertainty before that moment, using checks that are cheap relative to the size of a typical deposit.
This playbook walks through the checks we would run on any new supplier in China, in roughly the order they make sense: paper, people, product, then the factory floor.
Start with the business licence
Every legally registered company in mainland China has a business licence carrying an 18-character unified social credit code. Ask for a clear photo of the licence, then look the company up yourself on the National Enterprise Credit Information Publicity System, the government registry. Do not rely on a screenshot the supplier sends.
Check that the following line up:
- The company name, in Chinese characters and in the pinyin or English version used on your quote, matches the entity that will sign your contract.
- The registration status is active, with no abnormal operation listings or administrative penalties you cannot explain.
- The business scope includes production or manufacturing of your product category, not only sales, wholesale or import and export.
- The registered address is plausibly the factory you are being shown, or a related site you can verify.
Registered capital is worth a glance but is a weak signal. It is often subscribed rather than paid in, so a large figure does not prove the company has that money. Age of the company, consistency of the legal representative and any history of disputes usually tell you more.
Manufacturer or trading company?
Trading companies are not inherently bad; a good one can manage several factories and absorb small orders. The problem is when a trader presents itself as the factory, because you lose visibility into who is actually building your product and who controls quality.
Signals that you may be dealing with a trader:
- Business scope centred on trade, technology or import and export, with no production activity.
- An office address in a commercial tower rather than an industrial park.
- A catalogue spanning unrelated categories, such as earbuds, pet products and furniture.
- Reluctance to show live video of production lines, or a different company name on the factory gate.
If it is a trader, ask directly which factory makes the product and whether they will name it in the contract. Then vet that factory too.
Capability, certifications and references
Ask for evidence of export history in your category: the markets they ship to, the certifications those markets require and, where they are willing, customer references you can contact. A reference call with a similar-sized buyer is often more informative than any certificate.
Certifications need verification, not just a PDF. For ISO 9001, note the certificate number and the certification body, then check it on that body's online register; for certificates issued in China, the national certification regulator also runs a public lookup. Confirm the scope covers the site and the processes you care about. For product certifications and test reports (CE, FCC, UL, RoHS and similar), check the report number directly with the issuing lab or certification body, and confirm the model listed is actually your product or a close match. A test report for a different model, or a generic declaration with no lab behind it, proves little.
See the factory, then hold a sample to the standard
A video call factory walk is a cheap first filter. Ask the contact to walk from the gate to the line in one continuous shot, show the equipment relevant to your part, open the incoming inspection area and show work-in-progress for other customers with labels covered. Scripted showroom tours are a yellow flag.
Then place a paid sample order against a written specification. Judge the sample on dimensions, finish, function and packaging, and note how the supplier responds when something is off; that is a preview of production.
For orders where the deposit is material, an on-site factory audit is worth the cost. A good audit verifies the licence on the wall, headcount and shifts, equipment and capacity, the quality management system in practice, incoming material control and whether subcontracting is happening. For country trade-offs, see China vs Vietnam manufacturing.
Payment terms and bank details
A common structure for production orders is 30/70 T/T: a 30% deposit to start, and the 70% balance before shipment. The weakness is that the balance is often due on the supplier's word that goods are ready. Write into the purchase order that the balance is payable only after a passing pre-shipment inspection against agreed AQL levels, by an inspector you choose. Our AQL quality inspection guide explains how to set those levels.
Pay only to a corporate bank account in the name of the entity on your contract. Be wary of requests to pay a personal account or an unrelated company. If a Hong Kong or other affiliate will receive payment, name it in the contract.
Bank-detail-change fraud is a well-known pattern: an email that looks like it is from your supplier announces a new account. Treat any change as suspect until you confirm it by phone or video with a contact you already know, using a number you already have.
NNN, not just NDA
A Western-style NDA mostly addresses disclosure and may be hard to enforce against a Chinese company. An NNN agreement (non-disclosure, non-use, non-circumvention) is generally drafted in Chinese, governed by Chinese law and enforceable in Chinese courts, with defined damages. It is designed to stop the factory using your design or selling around you. Have it prepared or reviewed by a lawyer qualified in China; this article is not legal advice.
Red flags
- Prices far below every other quote with no clear explanation.
- Pressure to pay quickly, or to pay a personal account.
- Refusal of third-party inspection or on-site visits.
- Licence or certificate details that do not match the registry, the issuer or the contract entity.
A pre-deposit checklist
- Registry check: look up the unified social credit code yourself and confirm name, status and business scope.
- Identify the maker: establish whether you are dealing with a manufacturer or trader, and name the producing factory.
- Verify certificates: check ISO and product certificate numbers with the issuing bodies.
- Live video walk: a continuous, unscripted tour of the relevant line.
- Reference call: speak with at least one existing export customer if possible.
- Paid sample: test it against a written specification.
- On-site audit: for any material deposit, verify capacity and quality systems in person.
- Sign the NNN and PO: with balance payment tied to a passing pre-shipment inspection.
- Confirm bank details: by phone, matching the contract entity, before every first payment.
What Supply Flywheel brings
Supply Flywheel gives you verified factory discovery with match scores, plus supplier and country risk scoring that surfaces licence, scope and concentration issues early. Bilingual English and Chinese outreach is drafted for you, and quotes are parsed into a side-by-side comparison with landed cost. Orders, milestones, AQL inspection plans and NNN or PO e-signature sit in one workspace.
When you need people on the ground, our optional team in China (Shenzhen and Ningbo) and Vietnam (Hanoi) runs factory audits (from $399 per day on site), production monitoring, during-production and pre-shipment inspections, sample consolidation and negotiation in Mandarin. See pricing for plan details.
Before your next deposit, create a free account to start vetting suppliers, or book a free consultation to walk through a specific factory.