Sourcing accessories and packaging: cases, bands and retail boxes
Cases, straps and retail boxes are where customers touch your brand first. A practical guide to materials, colour control, chemical compliance and packaging suppliers.
On this page
Accessories rarely get the engineering attention a main device does, yet they are often what a customer handles first and most often. A case that yellows in three months, a strap that smells of solvent or a retail box with the wrong blue will undo a lot of careful product work. The good news is that the supplier base is broad and the processes are mature. The risk lies in materials, colour, chemicals and packaging details that are easy to leave unspecified.
This guide covers phone and device cases, watch and fitness bands, and retail packaging, for founders ordering anywhere from a few hundred to around 10,000 units.
Materials and what they mean for your supplier
Each common material implies a different process and a different kind of factory.
- Silicone. Usually compression-moulded, sometimes liquid silicone rubber (LSR) injection for tighter tolerances. Ask about food-grade or skin-contact grades, post-curing to reduce odour and volatile content, and resistance to dust pickup and staining.
- TPU. Injection-moulded and common for clear or flexible cases. Clear TPU tends to yellow with UV exposure; ask what anti-yellowing additives or coatings are used and request aged samples, not just fresh ones.
- Polycarbonate and hybrid cases. Hard shells, often combined with a TPU bumper through two-shot moulding or assembly.
- Leather and PU. Genuine leather varies hide to hide; quality depends on the tannery as much as the cut-and-sew shop. PU is more consistent but its durability depends heavily on the backing and coating. Ask for abrasion and colour-fastness test results.
A phone case manufacturer that excels in TPU may outsource leather, and a strap maker may buy buckles and spring bars from a separate hardware supplier. Ask who makes each component and include those sub-suppliers in your audit scope.
Colour, finish and golden samples
Colour is the most common source of disputes in this category. Specify colours with a Pantone reference and the target material, because the same Pantone code looks different on silicone, TPU and printed board. Request physical colour plaques or lab dips, approve them under an agreed light source, and set a tolerance you can actually check.
Once a pre-production sample is approved, sign and seal golden samples: one set held by the factory, one by you and, ideally, one by your inspector. Every inspection is judged against the golden sample, not against a render or a memory of the last batch. Record surface finish, texture, logo position and print density on the same sign-off sheet.
Chemical compliance: REACH, CPSIA, RoHS and Prop 65
Accessories are in close and prolonged skin contact, so chemical compliance matters more than most founders expect.
- REACH (EU). If an article contains a substance on the Candidate List of Substances of Very High Concern above 0.1% by weight, you have information obligations to customers. Ask suppliers for SVHC test reports on each material and colour, not one report for the whole product family.
- RoHS 2011/65/EU applies where the accessory has electrical or electronic parts, such as a charging case or a band with an embedded sensor.
- CPSIA (US). Children's products need a Children's Product Certificate based on testing at a CPSC-accepted lab. General-use products need a General Certificate of Conformity where a consumer product safety rule applies. Decide early whether your product could be considered primarily intended for children.
- California Proposition 65. If a product can expose consumers to a listed chemical, a clear warning may be required. Many brands set material limits so that warnings are not needed, then test to confirm.
Testing is carried out by accredited labs. Ask for reports tied to specific production lots, and retest when a material, colour or supplier changes.
Packaging and print
A custom packaging supplier is usually a separate factory from the accessory maker, and print is a craft of its own. Agree the dieline, board grade, print method, coatings, inserts and any special finishes (foil, emboss, spot UV) in writing. Ask for a printed proof and, for colour-critical work, a press check or a sample run on the actual board.
If you want the FSC label on your box, the printer itself must hold FSC chain-of-custody certification, and the claim must match the material actually used. Check the certificate code against the FSC database rather than taking a logo on a quote at face value.
Plan packaging for transit as well as shelf appeal. Drop and compression tests on the packed product, often run to ISTA-style procedures, show whether inserts and cartons protect the contents. Packaging MOQs are often higher than accessory MOQs, and printed packaging lead times can set your critical path.
MOQs, tooling, IP and landed cost
Moulded accessories need tools, and colour changes add setup cost and material minimums. Ask for MOQ per colour, not just per SKU. Write tooling ownership into the purchase order and an NNN agreement, particularly for distinctive case designs that are easy to copy and sell on marketplaces.
China, especially Guangdong, has the deepest base for silicone, TPU and printed packaging. Vietnam is well established in leather goods, textiles and cut-and-sew, and increasingly in packaging. Turkey has a long tradition of leather and textile work and sits close to European markets, which can shorten freight times. Duty treatment depends on HTS classification and origin, and rates change, so confirm current measures with a licensed customs broker and compare suppliers on landed cost. For US imports, keep documentation on cotton, leather and other upstream inputs with the Uyghur Forced Labor Prevention Act (UFLPA) in mind.
A practical sourcing sequence
- Write a materials and colour spec. List material grades, Pantone references, finishes and target markets.
- Shortlist by process. Separate silicone, TPU, leather and packaging suppliers rather than forcing one factory to do everything.
- Vet each supplier. Confirm licences and real capacity using the steps in how to vet a factory in China before paying a deposit.
- Approve colour and seal golden samples. Do this before any bulk material is ordered.
- Test chemistry and transit. Run REACH, CPSIA or Prop 65 testing as needed, plus drop tests on the packed product.
- Inspect against an AQL plan. Include colour comparison, fit on the actual device, print quality and odour. Our AQL quality inspection guide explains how to set it up.
- Consolidate and ship. Bring accessories and packaging together for final pack-out and pay balances after passing inspections.
If your accessory pairs with a wearable, the wearables sourcing guide covers the device side.
What Supply Flywheel brings
Supply Flywheel is sourcing software with an optional team on the ground. For accessories and packaging:
- Verified factory discovery with match scores across silicone, TPU, leather and packaging suppliers.
- Supplier and country risk scoring, including business verification and country-level exposure.
- Bilingual English and Chinese outreach drafted for you, with material, Pantone and finish requirements stated clearly.
- Quote parsing and side-by-side comparison with landed cost, including per-colour MOQs, tooling and packaging.
- Orders, milestones, AQL inspection plans and NNN/PO e-signature in one workspace.
- An optional on-the-ground team in China and Vietnam for factory audits, production monitoring, during-production and pre-shipment inspections, sample consolidation and negotiation in Mandarin. For Turkey, the platform covers discovery, risk and comparison, and on-site work is arranged case by case or through partners.
To start a shortlist, create a free account, or book a free consultation to talk through materials, colours and packaging.